Stanley D 230/10/50V
Never available again
View alternatives in the sidebar
View alternatives in the sidebar
Product number | 302070 | |
|---|---|---|
Manufacturer code | 8117180STN067 | |
Brand | Stanley | |
Warranty | 2 years | |
Processing of your defect | Carry-in warranty |
Oil free | ||
|---|---|---|
Compressor suitable for | Abrasive blaster, Demolition hammer, Die grinder, Electric drill, Grinder, Impact wrench, Nozzle, Paint sprayer, Pistol grip inflator, Pistol grip tire inflator, Ratchet wrench, Sander, Tacker | |
Speed | 3400 rpm | |
Maximum air pressure | 10 bar | |
Number of cylinders | 1 | |
Suction capacity | 221 l/m | |
Boiler | ||
Tank size | 50 l | |
12-Volt compressor | ||
Portable (mobile use) | ||
Mobile | ||
Work (compressor) | Abrasive blasting, Breaking, Cleaning and spraying of cleaning agents, Cutting metal, Drilling in wood and plaster, Inflate tires, Precision work, Sanding, Spray painting, Tacking, Untwist nuts, Untwisting wheel bolts | |
Air hose attachment | European Quick Release | |
Horsepower | 2 hp | |
Net air output | 138 l/m | |
Compressor type | Reciprocating compressor | |
Noise level at 4m distance | 97 dB (A) | |
Noise level at 0m distance | 117 dB (A) | |
Type of DIYer | Devoted DIYer |
Weight | 22 kg | |
|---|---|---|
Depth | 33 cm | |
Width | 33 cm | |
Height | 84 cm |
Power source | ||
|---|---|---|
Power | 1500 W | |
Power supply type | Power grid | |
Connection voltage | 220 - 240 V |
anything for a smile
Net air output | 138 l/m | |
|---|---|---|
Tank size | 50 l | |
Oil free | ||
Noise level at 0m distance | 117 dB (A) | |
Noise level at 4m distance | 97 dB (A) | |
Air hose attachment | European Quick Release |
According to our compressor expert
You can use the compressor for light blow work, as well as in combination with heavier pneumatic tools.
The compressor is oil free, so it requires little maintenance.
The compressor is easy to move, thanks to its wheels and handle.
If the compressor is running for a long time, hearing protection is recommended.
With the Stanley D 230/10/50V, you can keep going for a while. This 1500W compressor has a 50L tank and a net air output of 138L per minute. With a maximum operating pressure of 10 bar, you can work with various air tools. You can connect a tacker to it or a pistol grip tire inflator, for example. But you can also work with heavier tools such as an impact wrench, demolition hammer, or abrasive blaster. The tank is placed vertically, so it doesn't take up much space. And thanks to the wheels and the relatively light weight of 22kg, the D 230/10/50V is easy to move.
I am very satisfied with this compressor: Pressure goes up to 10 bar as opposed to often only 8 bar Pleasant volume of 50 liter pressure vessel Due to vertical design, the compressor takes up little space Nice design Friendly price The only drawback is the noise, but I accept that and I don't find it a problem because on the other hand, the compressor is oil-free (maintenance-free) and the barrel has a large volume so that it does not have to be switched on as much. I have put the compressor in an enclosed space so that I no longer suffer from noise at all..
Dick
14 August 2013
Automatically translated from Nederlands
the black plastic cover over the engine resonates making it even more noisy if you put a screw in the two holes on the front where you can hang the plug (which are not there now) then the hood is better secured and it no longer resonates causing less noise
Leo van der Ploeg
25 September 2015
Automatically translated from Nederlands
just not powerful enough to loosen the wheel cap screws of my car. For using an air pump to inflate tires, this one is very good. As well as to blow material clean. I can't say more yet because I haven't had the device that long
pierre mesens
29 October 2013
Automatically translated from Nederlands