Ferm BJM1009
Never available again
View alternatives in the sidebar
View alternatives in the sidebar
Product number | 394994 | |
|---|---|---|
Manufacturer code | BJM1009 | |
Brand | Ferm | |
Warranty | 2 years | |
Processing of your defect | Carry-in warranty |
Power source | ||
|---|---|---|
Power | 900 W | |
Connection voltage | 220 - 240 V | |
Power supply type | Power grid | |
Cable length | 3 m |
Weight | 4,25 kg |
|---|
Speed | 11000 rpm | |
|---|---|---|
Connection for vacuum | ||
Type of dust extraction | Dust bag/cup | |
Milling diameter | 22 mm | |
Groove width | 14 mm | |
Maximum cutting depth | 14 mm | |
Constant speed | ||
Including miter guide | ||
Type of DIYer | Occasional handyman | |
Power source | ||
Power | 900 W | |
Connection voltage | 220 - 240 V | |
Power supply type | Power grid | |
Cable length | 3 m | |
Weight | 4,25 kg |
anything for a smile
Constant speed | ||
|---|---|---|
Maximum cutting depth | 14 mm | |
Groove width | 14 mm | |
Speed | 11000 rpm | |
Power | 900 W |
According to our biscuit joiner expert
The slat cutter is supplied complete with slats and accessories, so you can get started right away.
You work as dust-free as possible with the included dust bag.
Thanks to the solid aluminum base, it is a durable slat cutter.
The speed can be reduced with heavy loads on the slat cutter.
With the Ferm BJM1009 slat cutter you can easily make solid wood joints. It is easy to operate and is therefore very suitable for the novice hobbyist or do-it-yourselfer. The BJM1009 has a solid aluminum base, so that the slat cutter lasts a long time. It is also suitable for sawing parquet or laminate along a wall or plinth. In addition, the milling machine is equipped with a dust bag so you can work as dust-free as possible and comes complete with handy robust storage case.
5 stars
18
4 stars
38
3 stars
5
2 stars
1
1 star
1
I bought this machine because I was looking for a not too expensive machine that I could experiment with. Another option was to rent, but then I would have spent almost the same for a day as if I bought this machine myself. The machine works excellently, the saw cuts are nicely consistent in depth and width and the dust extraction is above expectations. Of course there are some lesser points, such as the switch is not very smooth, so it takes some effort to switch on the machine. Also, not all parts are nicely finished, but it does work, you just need a little more attention when operating. However, these are especially points that you notice when you compare machines that cost at least five times that.
Nico Buddelmeijer
11 December 2014
Automatically translated from Nederlands
The supplied dust bag works perfectly in horizontal position (for which the device is made), however to shorten a laminate floor, to remove the pressure from an expanded floor, use the device in vertical position. In this case, it is better to connect a vacuum cleaner to avoid accumulation.
The device has a strong tendency to pull to the left due to the direction of rotation of the blade, hold it firmly.
Complete product and can certainly be used to take the pressure off a laminate floor. (creates approximately 16mm space from the wall/plinth). Note: stick felt pads on the device to prevent streaks on the laminate floor.
Maarten
29 July 2014
Automatically translated from Nederlands
Bought this machine as an interior builder. I always work with the lammello at work. Which I use several times every day. I also wanted to have a lammello for myself. Only the real ones are almost 10x more expensive than this one. So that fell off
The choice I made to I am happy to buy this. You should take it a little easier than the official lammello. But that doesn't matter. The only downside is that there is some play in the valve. If you keep it horizontal. (Expand) There is also no fixed points for 45 degrees. But this is never used.
I would recommend this machine to people who need it every once in a while
Ilya Middelham
19 May 2016
Automatically translated from Nederlands
