Never available again
View alternatives in the sidebar
View alternatives in the sidebar
According to our compressor expert
The Airpress H 215/6 is suitable for use in smaller spaces. The compressor is an 8-bar, entry-level compressor with a 6L tank and a net air output of 130L/min. This makes this compressor powerful enough to inflate tires or to blow your workplace clean, but also to use in combination with pneumatic tools. For example, you can carry out light drilling jobs, shoot nails with a tacker, and connect it to an impact wrench to loosen or tighten bolts. The H 215/6 is compact and relatively lightweight, so you can easily take it with you. Thanks to the rubber feet, it's solid and stable at all times.
Net air output | 92 l/m | |
Tank size | 6 l | |
Oil free | ||
Noise level at 0m distance | 96 dB (A) | |
Noise level at 4m distance | 76 dB (A) | |
Air hose attachment | European Quick Release |
5 stars
81
4 stars
76
3 stars
9
2 stars
1
1 star
0
I bought this compressor to supplement a large full compressor and to replace a 24 liter Kinzo compressor. I was looking for a handy and easy to move compressor and this one is definitely one. Not too heavy and easy to lift thanks to the large handle. Noisy ? Yes indeed. But they all are, unless you specifically buy a "silent" compressor, then you can expect it to be relatively quiet.
For the first time I have blown a number of filters of vacuum cleaners clean. You need quite a bit of air for that. The maximum pressure is 8 bar, but during blowing it quickly drops to +/- 2.5 bar. This is approximately the pressure that the compressor can keep up with. For blowing clean, this is actually too little and you have to stop for a while to let the compressor come up to pressure again (I estimate about 20 to 30 seconds).
The specifications state that this compressor would be suitable for heavier pneumatic tools. I think you can forget that. Tools that require a high flow rate of air in continuous use, e.g. paint / liquid spray, chipping hammers, impact wrenches, etc. you can not seriously provide air with this. The initial pressure is more than sufficient, but it soon drops. Unless you always want to wait for the pressure to build up again, this "heavier work" requires a compressor of a completely different caliber.
Nail tackers won't be a problem as they don't really need a high flow rate unless you are tackling a lot of nails in a row very quickly.
For the purpose for which I bought it, it seems to be a fine compressor: mobile use, the occasional nail tacker, pumping tires and blowing clean. I take it for granted that I occasionally have to wait for the pressure to build up again. As said before, for serious work I have a full-fledged compressor at my disposal and the Kinzo compressor that is replaced by this Airpress may have a slightly higher flow rate, but is very inconvenient to transport.
Conclusion: If you know the limitations and your expectations are not too high, then this is a great compressor for the money.
Wilko Kater
10 March 2019
Automatically translated from Dutch
Easy to lift and clean up
Piet Bierens
16 November 2016
Automatically translated from Dutch
For what I use the device (inflating car tires and blowing household appliances clean) it more than meets my expectations.
Luc Van Goethem
11 May 2018
Automatically translated from Dutch
Product number | 708156 |
Manufacturer code | 36943 |
Brand | Airpress |
Warranty | 2 years |
Processing of your defect | Carry-in warranty |
Oil free | ||
Compressor suitable for | Demolition hammer, Electric drill, Impact wrench, Pistol grip inflator, Pistol grip tire inflator, Ratchet wrench, Tacker | |
Speed | 3450 rpm | |
Maximum air pressure | 8 bar | |
Number of cylinders | 1 | |
Suction capacity | 153 l/m | |
Boiler | ||
Tank size | 6 l | |
12-Volt compressor | ||
Portable (mobile use) | ||
Mobile | ||
Work (compressor) | Breaking, Drilling in wood and plaster, Inflate tires, Tacking, Untwist nuts, Untwisting wheel bolts | |
Air hose attachment | European Quick Release | |
Horsepower | 1,5 hp | |
Net air output | 92 l/m | |
Compressor type | Reciprocating compressor | |
Noise level at 4m distance | 76 dB (A) | |
Noise level at 0m distance | 96 dB (A) | |
Type of DIYer | Occasional handyman |
Weight | 10 kg |
Depth | 33 cm |
Width | 38 cm |
Height | 30 cm |
Power source | ||
Power | 1100 W | |
Power supply type | Power grid | |
Connection voltage | 220 - 240 V |
