Never available again
View alternatives in the sidebar
View alternatives in the sidebar
Product number | 830987 | |
|---|---|---|
Manufacturer code | DWE7492-QS | |
Brand | DeWalt | |
Warranty | 2 years | |
Processing of your defect | Carry-in warranty |
Speed | 4800 rpm | |
|---|---|---|
Laser guide | ||
Connection for vacuum | ||
Type of dust extraction | Connection for vacuum | |
Type of saw blade | Circular saw blades | |
Saw blade diameter | 250 mm | |
Diameter arbor hole | 30 mm | |
Number of teeth (numerical) | 24 | |
Saw blade thickness (numerical) | 1,8 m | |
Tiltable saw head | Tiltable to one side | |
Maximum cutting depth 45° (slant) | 45 mm | |
Maximum saw blade incline left | 0 ° | |
Maximum cutting depth 90° (straight) | 77 mm | |
Including underframe | ||
Table extension | ||
Suitable for (surface) | Hard wood , Laminate, MDF, Plastics, Wood | |
Type of DIYer | Professional |
Power supply type | Power grid | |
|---|---|---|
Cable length | 3 m | |
Connection voltage | 230 V |
Weight | 27 kg |
|---|
anything for a smile
Saw blade diameter | 250 mm | |
|---|---|---|
Power | 2000 W | |
Laser guide | ||
Maximum cutting depth 45° (slant) | 45 mm | |
Maximum cutting depth 90° (straight) | 77 mm | |
Connection for vacuum |
According to our table saw expert
You have a lot of room for maneuver due to the 3 meter long power cord.
The light weight makes the cross-cut saw easy to transport.
Just 1 saw blade included.
Use the DeWalt DWE7492-QS to make a cross-cut in (hard) wood, MDF, laminate, and plastics. Thanks to the overload protection, you can even make cross-cuts in hard, wet, and frozen wood without difficulty. The rack and pinion fence provides a cutting capacity of 835 millimeters. Combined with the scales, it allows you to work with precision. The radial arm saw has a connector for the vacuum, so you're not distracted by dust that gets released while you work. A saw blade with a 250mm diameter and a thickness of 2mm is included by default. With a relatively light weight of 26.6kg, you can easily take the radial arm saw to your next job.
The exact measurements
Ludo Verbiest
13 April 2021
Automatically translated from Nederlands
You can't ignore it, this is the best you can buy under 1000 euros. The longitudinal guide setting is superior to all other brands. This one cuts super detailed. Everything about the saw is just great and as a good sawing machine should be. You can replace the split knife with safety cover at the back with the corresponding small split knife so that you can easily saw grooves in panels. How great is that?! This machine is simply worth a lot for the money. I've been working with this for 2 years now so I didn't have to hesitate to buy it. No doubt, no other makita, metabo or millwaukee can beat this machine. This is simply the top of Dewalt!
jurgen s
28 June 2022
Automatically translated from Nederlands
This saw is very precise once adjusted. It didn't cut straight from the factory. Not only the rip fence had to be adjusted, the saw itself was insufficiently parallel to the guides molded into the table itself. Fortunately, all this is quite easy to adjust (enough can be found on YouTube). A big plus is that everything can be adjusted very easily and accurately if something is not properly calibrated from the factory, as was the case with my saw. I replaced the cross guide with an accurate aftermarket model. The supplied one was really useless for accurate results. All in all I am very satisfied with the purchase.
Luc Rymenants
8 January 2023
Automatically translated from Nederlands
